FUJITSU MPC3065AH - Manual (Page 19)

C141-E056-02EN 1 - 4
1.2 Device Specifications
1.2.1 Specifications summary
Table 1.1 shows the specifications of the disk drive.
Table 1.1 Specifications
MPC3045AH MPC3065AH
Formatted Capacity (*1) 4551.96 MB 6510.55 MB
Number of Heads 4 6
Number of Cylinders
(User + Alternate & SA)
10,424 + 83
Bytes per Sector 512
Recording Method 8/9 PRML
Track Density 11,000 TPI
Bit Density 162,754 BPI
Rotational Speed 7,200 rpm ± 0.5%
Average Latency 4.17 ms
Positioning time
• Minimum
• Average
• Maximum 2.0 ms typical
(Read) 9 ms typical, (Write) 10 ms typical
(Read) 18 ms typical, (Write) 19 ms typical
Start/Stop time
• Start (0 rpm to Drive
Read)
• Stop (at Power Down)
Typical: 8 sec., Maximum: 16 sec.
Typical: 20 sec.,Maximum: 30 sec.
Interface ATA–3
(Maximum Cable length: 0.46 m)
Data Transfer Rate
• To/From Media 12.65 to 19.18 MB/s
• To/From Host 16.7 MB/s Max. (burst PIO mode 4, burst DMA mode
2),
33.3 MB/s Max. (burst ultra DMA mode 2)
Data buffer 512 KB
Physical Dimensions
(Height
×
Width
×
Depth)
26.1 mm max. × 101.6 mm × 146.0 mm
(1.03” max. Ч 4.0” Ч 5.75”)
Weight 600 g
*1: Capacity under the LBA mode and the CHS mode.
Under the CHS mode (normal BIOS specification), formatted capacity, number of
cylinders, number of heads, and number of sectors are as follows.
Model Formatted Capacity No. of Cylinder No. of Heads No. of Sectors
MPC3045AH 4551.96 9,408 15 63
MPC3065AH 6510.55 13,456 15 63