FUJITSU NC14003-T256/L - Manual (Page 15)

14
Installing the USB HUB, USB Keyboard and USB Mouse drivers
Initial setup is required when connecting with a USB port.
The required drivers are contained in OS.
Therefore, it is not necessary to newly prepare.
The setup procedure for Windows98
Turn the PC on, and wait for Windows 98 to start.
Connect the switch device to the host (refer to page 5 for details).
When the [Add New Hardware Wizard] window appears, click the [Next] button.
Select [Search for the best driver for your device (Recommended).], then click the [Next] button.
When the following screen appears, click the [Next] button.