FUJITSU NC14003-T256/L - Manual (Page 18)

17
Printer & Storage Device Sharing
Sharing of USB devices connected to the FS-102ATL allows them
to be used by both PCs.
[Required Software]
Microsoft Network
[Acquisition Method]
Standard with OS
How to Select the Host PC
There are two ways of selecting the host: by the Select switch on the switch device or from the
keyboard (Hot Key mode).
You can also select an unconnected port or the port of a host that is OFF.
If a selected PC is turned OFF, the selected state is changed another PC.
1. Selecting with the Select Switch
Press the Select switch. This switches to the selected PC, and the PC Select LED lights up.
2. Selecting with the keyboard (Hot Key Mode)
The Hot Key Mode provides the following three key operations. These operations can be enabled
(turned ON) and disabled (turned OFF) by the DIP switches (switches 1 to 3) on the switch
device.
SW1-ON : Ctrl, Alt and Shift simultaneously held down
SW2-ON : Ctrl key pressed twice consecutively
SW3-ON : Scroll Lock key pressed twice consecutively
Select the host by the above Hot Keys.
Printer
MO/CD-R(W)