Frymaster SINBAD II User Manual
Page 15
Advertising
3-4
PROBLEM
Probable Causes
Corrective Action
A.
Operator error.
A.
Batch weight selector “1” must be
pressed four consecutive times
within 5 seconds after the
PROGRAM Switch is pressed. If
more time is taken, or if a selector
other than “1” is pressed, the unit
automatically returns to the
STANDBY mode.
UNIT GOES BACK
TO “STANDBY”
MODE WHILE
OPERATOR IS
TRYING TO ENTER
“PROGRAM” MODE.
If the above action did not correct the problem, call FASC.
Advertising