Sinbad – Frymaster SINBAD II User Manual

Page 4

Advertising
background image

SinBaD

II

SINGLE BASKET DISPENSER

CHAPTER 1: GENERAL INFORMATION


1-1

1.1

Parts Ordering and Service Information

In order to assist you as quickly as possible, the

Frymaster

Factory Authorized Service Center (FASC) or

Service Department representative requires certain specific information about your equipment. Most of this
information is printed on a data plate affixed to the upper right corner of the right side of your unit. Specific
part numbers are listed in Chapter 5 of this manual.

Parts orders may be placed directly with your local FASC or distributor. Included with your unit when
shipped from the factory is a list of

Frymaster

FASCs. If you do not have access to this list, contact the

Frymaster

Service Department at 1-800-551-8633.


When ordering parts, the following information is required:

Model Number:

Serial Number:

Voltage:

Item Part Number:

Quantity Needed:


Service information may be obtained by contacting your local FASC or Distributor. Service may also be ob-
tained by calling the

Frymaster

Service Department at 1-800-551-8633.


When requesting service, please have the following information ready:

Model Number:

Serial Number:

Voltage:

In addition to the model number, serial number, and voltage, please be prepared to describe the nature of the
problem and have ready any other information that you think may be helpful in solving your problem.

1.2 Safety

Information


Before attempting to operate your unit, read the instructions in this manual thoroughly. Throughout this
manual, you will find notations enclosed in double-bordered boxes similar to the one below.

DANGER

Example of a DANGER box.

CAUTION boxes contain information about actions or conditions that may cause or result in a malfunction
of your unit
.

WARNING boxes contain information about actions or conditions that may cause or result in damage to
your unit,
and which may cause your unit to malfunction.

DANGER boxes contain information about actions or conditions that may cause or result in injury to per-
sonnel
, and which may cause damage to your unit and/or cause your unit to malfunction.

Advertising