Furuno NAVNET 1933C-BB - Manual (Page 43)

2-5
Note: The power for the power supply unit and processor unit must be drawn from the
same power switch on the ship’s power terminal board.
Other Equipment
(ex. GPS, E/S, etc.)
Ship's power terminal board
Power supply unit
Other Equipment
(ex. GPS, E/S, etc.)
Other Equipment
(ex. GPS, E/S, etc.)
Other Equipment
(ex. GPS, E/S, etc.)
Other Equipment
(ex. GPS, E/S, etc.)
POWER
DATA 3 NETWORK CONT DATA 1 DATA 2
DJ-1
SLAVE DISPLAY
RGB OUT
NTSC/PAL
2
GND 3 INPUT 12-24 VDC 1
CARD SLOT
3 2 1
GND
F.G.
12 VDC OUTPUT
OPTION
Processor unit
Replacement of the fuse
The power supply unit is shipped with a 15 A fuse. Replace the 15 A fuse with a 7 A fuse
(supplied) when the ship’s battery is 24 VDC. The fuse in the processor unit is also 15 A.
Replace it with a 3A fuse.