Furuno NAVNET 1933C-BB User Manual
Page 61
3-17
7. Select sentence and press the A: ON/OFF soft key to show ON (output) or “- -“ (no
output) as appropriate.
8. Press the E: RETURN soft key.
9. Press the [MENU] key to quit.
Contents of DATA 1 and DATA2 PORT menus
Item Description
Settings
Default
Setting
FURUNO GPS
Sensor
Selects whether the GPS Receiver
GP-310B/320B
is connected to the
DATA1 or DATA2 port or not.
Yes, No
Yes (DATA1)
No (DATA2)
Output Format
Selects NMEA output version for the
equipment connected.
NMEA0183 Ver.
1.5, NMEA0183
Ver. 2.0
NMEA0183 Ver. 2.0
Lat/Lon Format
Selects latitude/longitude format to
output.
DD
°
MM.MM’,
DD
°
MM.MMM,
DD
°
MM.MMMM’
DD
°
MM.MMM’
Output Destination Selects whether to output route (data
sentence RTE) and waypoint data (data
sentence WPL) when destination is set.
Yes, No
No
SELECT SNTNC
(soft key)
Selects data sentence(s) to output. Select sentence with the trackball and press the
ON/OFF soft key to show ON or “- -“ (OFF) as appropriate. See the figure on page 3-16
sentence and default settings.