Furuno NAVNET 1933C-BB - Manual (Page 51)

3-7
4. Press the A: EDIT soft key to show the setting window.
ON
OFF
TIMING ADJUST
Timing adjust setting menu
5. Select ON and press the C: ENTER soft key to show the radar display.
PUSH ENTER KNOB AFTER
ADJUSTING SWEEP TIMING.
E RETURN
Timing adjustment setting display
6. Rotate the [ENTER] knob to straighten the target selected at step 2, and then press the
E: RETURN soft key to finish.
VIDEO ADJUSTMENT
Adjust video amplifier input level as below.
1. Open the RADAR SETUP menu and select VIDEO ADJUST by the trackball.
2. Press the A: EDIT soft key to show the setting window.
ON
OFF
VIDEO ADJUST
Video adjustment setting window
3. Select ON.
4. Press the C: ENTER soft key to start video adjustment.
5. When the adjustment is completed, the message “NOW ADJUSTING VIDEO”
disappears, and control returns to the menu screen automatically.