Furuno NAVNET 1933C-BB - Manual (Page 44)

2-6
2.3 Connection of CU-200
1) Connection between one processor unit and one memory card IF unit
Connect as shown in the figure below.
Processor unit
Memory card IF unit
OUTPUT
12VDC
NETWORK
12 VDC
NETWORK
MJ-A3SPF0026-050/100 (5/10 m)
MJ-A6SPF/TM11AP8C050/100(5/10m)
two mini-cards
12 VDC
RJ-45
2) Connection between one memory card IF unit and multiple processor units
Prepare optional cable MJ-A6SPF0014-010/050/100/200/300 (1, 5, 10, 20 or 30 m), and procure
HUB and CAT5 STP cable locally. Connect as shown in the figure below.
No.1
Processor
unit
OUTPUT
12 VDC
NETWORK
No.2
Processor
unit
No.3
Processor
unit
No.4
Processor
unit
MJ-A3SPF0026-050/100 (5/10 m)
Memory card IF unit
12 VDC
NETWORK
MJ-A6SPF0014-010/050/100/
200/300(cross)
CAT5 STP cable
(local supply)
HUB
(owner supply)
two mini-cards
MJ-A6SRMD/TM11AP8-005
MJ-A6SPF0014-010/050/100/200/300
MJ-A6SPF0014-010/050/100/200/300
MJ-A6SPF0014-010/
050/100/200/300