FUJITSU fi-5750C - Manual (Page 34)

AP-4
There is a shadow on
the leading edge of the
scanned images.
Are the Feed rollers dirty? Clean the Feed roller. For details, refer to "4
DAILY CARE OF THE EQUIPMENT" of the "fi-
5750C Operator's Guide"
Adjust the offset. For Windows 98, Windows Me, Windows 2000
and Windows XP, adjust the [Sub-scan Setting\
on] Scanners and Cameras\ in the [Control Panel].
For Windows 95 and Windows NT 4.0, right-click
the Scanner Control Center icon, select [Options] -
[Sub-scan Setting] and adjust the offset. Please
refer to Chapter 7 “Online Setup” of the “fi-5750
Operator's Guide” and adjust the offset from the
Software Operation Panel (online settings).
TABLE 1.
Symptom Check this Item Remedy