FUJITSU fi-5750C - Manual (Page 36)

AP-6
Appendix 2 Daily Care
*1) For details on the cleaning materials, contact the FUJITSU scanner dealer where you purchased the scanner.
CAUTION
The glass of the inside of the ADF becomes hot during operation.
When you clean the inside of the scanner, turn OFF the power and unplug the AC cable from
the outlet and wait for at least three minutes.
Do not turn OFF the scanner when you clean the Feed rollers and Plastic Rollers.
Cleaning Materials
TABLE 4.
Cleaning Materials Parts No. Remarks
Cleaner F1 CA99501-0013 1 bottle.
Moisten a cloth with this fluid
and wipe the respective areas. *1
Cleaner F2 CA99501-0014 1 bottle.
Moisten a cotton swab with this
fluid and clean the respective
areas. *1
Cleaning Paper CA99501-0012 10 sheets / package. Moisten a
Cleaning Paper with Cleaner F1
and insert it into the ADF. *1
Lint-free dry cloth Commercially available one.
CAUTION
Do not clean the rubber rollers with Cleaner F2.