Fisher & Paykel Aerotech OD302 - Manual (Page 40)

38
Self Clean - delayed start
Your AeroTech™ oven can be set to start a self clean cycle at your convenience:
1 Check the clock shows the correct time of day.
2 Select the Self Clean mode by turning the oven mode dial.
3 Select the maximum temperature using the temperature dial.
4 While is shown in the display, press the button. The COOK TIME
and
AUTO
symbols
and the colon will flash.
5 Set the time you want the oven to finish the self clean cycle by rotating the Setting Selector
dial. If there is time to wait before the self clean cycle starts, AUTO
and
CLEAN
symbols
will appear in the clock display.
6 When the self clean cycle starts, DOOR LOCK
and
CLEAN
symbols will appear in the display
and the time remaining will count down.