Fisher & Paykel Aerotech OD302 - Manual (Page 42)

40
Problem Possible Cause What to do
Oven door wont
open Oven is still in self-clean
mode. Your oven door will unlock when it has
cooled to a safe temperature.
Oven light does
not work Light bulb has blown. Replace light bulb. Refer to
Maintenance for details.
Oven not heating Oven door is not properly
closed or opened
too frequently during
operation. Oven elements and fans turn off while
the door is open so be sure the oven
door is properly closed. Note: Broil
modes are designed to operate with
the door closed.
Baked foods are
pale and under-
cooked Shiny baking trays, tins,
or pans being used from
a previous oven with an
unconcealed bottom
element. Shiny baking trays, tins, and pans reflect
the heat back towards the bottom of
the oven resulting in poor cooking
performance. Food tends to take longer
to cook and does not brown well. The
accessories supplied with the oven
work efficiently by absorbing heat and
may reduce cooking times.
Fault codes
If a fault occurs, the oven will ‘beep’ every second and a fault code will appear in the clock
display as a letter ‘F’ with a number after it. Depending on the nature of the fault, it may be
possible to clear the display by pressing the
button. If the fault code and continuous
‘beep’ cannot be cleared this way, note down the fault code and switch the oven off at the
main power supply. In either event, please call your Fisher & Paykel Authorized Service Center
and advise them of the fault code. This information will help them to resolve the problem.
If you have any questions about operating the product, please contact our Fisher & Paykel
Customer Care Center.