Fisher & Paykel Aerotech OD302 - Manual (Page 43)

41
Maintenance
How to change the oven light bulbs
The oven is illuminated by three 12 volt/20 watt halogen bulbs. These have a very long life,
but if you should need to replace one, follow these steps:
1 Turn the oven off and allow it to cool.
2 Take out the shelves and use a small flat head screwdriver to twist and lift the retainer clip at
the top of the glass light cover. The clip pivots counter-clockwise (see the diagrams below).
3 Carefully lift the glass cover out of the lower support and pull out the faulty bulb.
4 Holding the replacement bulb in a soft cloth or tissue (touching the bulb will reduce its life
span), insert the new bulb. The two pins are vertically orientated.
5 Reposition the glass cover and twist the top clip back in place. The procedure is the same for
the light in the roof of the oven cavity.
plate glass cover
retainer clip
sockets for
the pins
pins
replacement bulb