Foundry Networks IRONPOINT 250 - Manual (Page 33)

Installing the IronPoint 250 Access Point
August 2007 © 2007 Foundry Networks, Inc. 4-5
Figure 4-4. Attaching the Bracket to a Suspended Ceiling
Locking the Access Point
To prevent unauthorized removal of the access point, you can use a Kensington Slim MicroSaver
security cable (not included) to attach the access point to a fixed object.
Installing an External Antenna
You can install an external antenna to extend the access point's coverage area. If you install the
external antenna while live sessions are on the access point, those sessions will be terminated.
Professional Installed Device — Must not be distributed through retail stores: You must use
the appropriate antennas, cables, and where applicable, surge arrestors, for your given region. You
are responsible for verifying local regulations or legislation that may impose restrictions on the use of
Push access point up
onto T-rail, then turn
Position T-rail between
mounting holders
Clips lock T-rail into
mounting holders