Foundry Networks IRONPOINT 250 - Manual (Page 38)

Foundry IronPoint 250 Installation Guide
4-10 © 2007 Foundry Networks, Inc. August 2007
9. Connect the other end of the cable to the network subnet for which the access point was
programmed.
10. Power up the access point. It can now be managed using its command line interface (CLI) or
Web interface.
Once the access point is set up with country code and IP address, other parameters can be defined
using one of the following methods:
• A PC running Internet Explorer version 5.0 (and above) or Firefox Web browser to directly access
an individual Foundry AP’s internal Web management interface.
• A Telnet or SSH v2 client to directly access Foundry AP’s command line interface (CLI).
Refer to the Foundry IronPoint Access Point User Guide for details.