FOCUS Enhancements FS-3 - Manual (Page 10)

MOUNTING TO A CAMCORDER
The FireStore FS-3 is designed to mount directly
to full size DV camcorders. FireStore FS-3
features either Anton/Bauer, V-Mount, PAG Lock
or NP mount plates allowing quick connection to
most camcorders featuring these battery systems.
Mounting to Anton/Bauer, V-Mount or PAG-
Lock Equipped Camcorders
To mount to camcorder's featuring either an
Anton/Bauer, V-Mount or PAG Lock battery
system, do the following:
1) Remove any connected battery from the
camcorder's battery mount plate.
2) Connect the FS-3 unit to the battery mount
plate on the rear of the camcorder.
3) Attach the battery to the rear of the FS-3 unit.
Mounting to NP Battery Equipped
Camcorders
To mount to camcorder's featuring NP battery
systems, do the following:
1) Remove and disconnect the attached
battery system from the camcorder. Consult
either your camcorder's documentation or
documentation from your battery system for
more detailed information on removing the
battery system. Leave any existing rubber
gasket between the camcorder and battery
system in place.
2) Mount the NP adapter plate to the rear of the
camcorder with the supplied four screws (the
plate mounts to the rear of the camcorder
utilizing the same mount holes the NP battery
case mounts to).
FireStore FS-3 User Guide
PAGE 9