FOCUS Enhancements FS-3 - Manual (Page 33)

Repair Disk
REPAIR allows the user to select either
CHECK DISK or CURRENT CLIP.
CHECK DISK scans the entire volume for any
errors (usually, if a disk was corrupted during a
recording due to sudden power loss, check disk
will alert the user of this). To exit check disk,
press either NO or EXIT.
If an error is found, the user will be prompted
to repair the file. File repair only takes a few
moments to complete in most cases.
CURRENT CLIP does a similar function, but
on the selected clip only. If an error is found,
FS-3 will prompt the user to repair the problem.
File Name
File Name displays the base file name of the
selected clip.
Factory Reset
When this function is selected, FS-3 will revert
all settings and values back to their factory
default state. Pressing YES will start
factory reset. Pressing EXIT or NO will exit
from menu. Warning: Factory Reset is
not un-doable!!!
FireStore FS-3 User Guide
PAGE 32