FOCUS Enhancements FS-3 - Manual (Page 32)

WARNING: FORMAT ERASES ALL DATA
ON THE DISK DRIVE!
To exit from format, press either NO or EXIT.
To continue with format, press the YES key.
To exit from the warning screen, press either NO
or EXIT. To begin the format, press the YES key.
FireStore FS-3 utilizes a FAT32 format type. If
you are using a non-FAT32 formatted drive, see
the section on Partitioning a volume. Once
complete, the disk drive is ready for use with
FS-3. It is advised that the drive be formatted
before a new record session is begun.
After a format is complete, ten file folders are
added to the disk drive (numbered 0-9). These
folders are utilized in the SCENE MARKING
feature (see page 33 of this User's Guide for
details). Also added to the disk is a LOG folder,
a DESKTOP folder and two additional files
called Desktop DB and Desktop DF. Do not
delete these files as they are required for
FireStore operation.
Partition Volume
When an unknown or blank volume type
(HDD) is connected to FS-3, the Partition
process puts a FAT32 format onto the drive. It
will erase any previous partition and data.
To exit from partition, press either NO or EXIT.
To continue with partition, press the YES key.
WARNING: PARTITION ERASES ALL DATA
ON THE DISK DRIVE!
Once complete, the disk drive is ready for use
with FS-3.
FireStore FS-3 User Guide
PAGE 31