FOCUS Enhancements FS-3 - Manual (Page 34)

The following screen will display when complete:
After factory reset is complete, please restart
FS-3
Factory Default States Are as Follows:
Display:
• COUNTER
Rec Mode:
• DEFAULT REC MODE: NORMAL
• RETRO DISK – RETRO VALUE -> 000min
• RETRO CACHE – CACHE ->00 sec
• TIME LAPSE –> 00:00:00:00
Play Mode:
• DEFAULT PLAY MODE: PLAY CLIP
Play From:
• DEFAULT PLAY FROM MODE:
TRACK LIST
Control Mode:
• DEFAULT CONTROL MODE: LOCAL
Rec Format:
• DEFAULT REC FORMAT: AVI TYPE 2
Setup:
• HDD PORT -> HDD
• SET DATE&TIME :
• DATE: 07/24/03
• TIME: 12:00:00
• OS VERSION NO. -> VARIABLE
• TC MODE -> EXT TC
• TC SET:
• TC PRESET -> 00:00:00:00
• UB PRESET -> 00 00 00 00
• DROP/NON-DROP -> NON-DROP
• IR -> ENABLE
• GPI -> DISABLE
• BACKLIGHT -> ON
• CLIP PREVIEW -> PREVIEW ON
• AUDIO CORRECTION -> MEDIUM
• FOLDER PREF -> SCENE MARK
USING SCENE MARKING
The FireStore FS-3 SCENE MARKING
feature allows clips to be marked for
placement in particular folders during
recording, playback or stop mode. When a
drive is formatted using FireStore, ten folders
will be created numbered 0 through 9. After
format on FireStore, it is possible to connect
the HDD to a computer and give each of these
folders a custom name (if you need help
mounting your FireWire HDD to your
computer system, see section titled “Getting
FireStore Recorded Clips onto a Computer”
on page 34 of this User's Guide). To rename
each folder, simply click on the folder name
until it is highlighted, then type in the desired
name of the folder.
NOTE: Folder names cannot exceed eleven
characters.
Folders will be ordered on FireStore in
numerical followed by alphabetical order. For
instance, if folders are named “Scene 1”,
“Scene 2” and “Auditions”, they will appear
on FireStore as “1 Auditions”, “2 Scene 1” and
“2 Scene 2”. The folder number is added in
front of the folder name on the FS-3 LCD
display for easy identification when using the
FireStore FS-3 User Guide
PAGE 33