FOCUS Enhancements FS-3 - Manual (Page 11)

3) FS-3 features a two wire connector with
black and red cables that connects main power
between the FS-3 and the camcorder. Connect
this to the equivalent connector on the rear of
your camcorder.
If you are using a digital battery system that
passes battery life status to the camcorder, and are
using a camcorder that is compatible with these
systems, connect the following cables between
FS-3 and camcorder (FS-3 NP version only:)
Anton/Bauer Digital Battery System
- Grey and Orange Cable
IDX Syncron Digital Battery System
- Blue and Red Cable.
4) “Hook” the FS-3 to the adapter plate on the
rear of the camcorder (these hooks are unique
to the FS-3NP model). Insert the supplied
gasket between the plate and the FS-3 unit.
Harness any loose cables into the “Hidey-Hole”
on the FS-3.
5) Once mounted, secure the two captive screws
at the base of the FS-3 to the camcorder. Ensure
that no cables are “pinched” between the FS-3
and the camcorder.
6) Re-attach the battery system to the rear of
the FS-3. Ensure to connect all cables and
utilize the supplied gasket between FS-3 and
the battery system. Harness any loose cables
into the “Hidey-Hole” on the FS-3.
CONNECTING A FIREWIRE CABLE
BETWEEN FS-3 AND CAMCORDER
Connect either the 6-pin to 6-pin or 6-pin to 4-
pin FireWire cable between the FS-3's “DV I/O”
port and the camcorder's DV interface.
FireStore FS-3 User Guide
PAGE 10