FOCUS Enhancements FS-3 - Manual (Page 30)

User simply selects the Mode. Highlighted
mode is current mode after exit. Pressing EXIT
will exit back to the menu screen.
Audio Correction Settings
This menu allows the user to change the
AUDIO CORRECTION setting on FS-3. User
simply selects the Mode. Pressing EXIT will
exit back to the menu screen.
AUDIO CORRECTION modes is an advanced
feature of FS-3. It is recommended that the
customer uses the factory default settings for
most operations (Factory default
is MEDIUM). Audio Correction Mode allows
the user to alter the performance of the audio
error corrector while recording. It is useful
when recording to FS-3 from tapes with lots of
dropouts. Error correction will only effect AVI
2, Canopus AVI, Matrox AVI, QuickTime and
AVID OMF. It does not effect RawDV
or AVI 1. The modes are:
OFF - No audio correction.
MEDIUM (default) - For “normal” clean
tape played back on camcorder or other VTR
with clean heads. Experiences occasional very
short audio mutes.
HIGH - For cases where there are visible
picture disturbances and likely long audio
dropouts (1/2 sec and up).
Folder Pref
The FS-3 KEEPER PREFERENCE folder
allows use of a single KEEPER folder or
multiple SCENE MARKING folders. The
highlighted preference is selected on EXIT.
See SCENE MARKING section on page 33 of
this User Guide for more details.
UTILITIES MENU
The UTILITIES MENU allows various utility
functions of FS-3 to be set. User simply selects
the Utilities Item. Pressing SEL will open the
sub menu. Pressing EXIT will exit back to the
menu screen.
Available items in the UTILITIES MENU are:
ORGANIZE FOLD
ORGANIZE OMF
DELETE CLIP
FORMAT
PARTITION
REPAIR
FILE NAME
FACTORY RESET
FireStore FS-3 User Guide
PAGE 29