Genicom PC4 - Manual (Page 15)

EasyCoder PC4 User’s Guide 3
Chapter 1 — Introduction
Safety Summary
Intermec assumes no responsibility regarding the CE Directive if the
printer is handled, modified, or installed in any way other than that
described in Intermec’s manuals.
• Read this manual carefully before connecting the printer.
• Do not put your fingers inside the print mechanism when the power is
on.
• Place the printer on an even surface which can support its weight.
• Do not spray the printer with water. If you are using a hose to clean
the premises in an industrial environment, remove the printer or pro-
tect it carefully from spray and moisture.
• Carefully read the warning text on the envelope before using a clean-
ing card.
Product Identification
The machine label is attached to the bottom of the printer and contains
information on type, model, and serial number as well as AC voltage. It
also contains various signs of approval.