Garmin GPSMAP 190-00683-00 - Manual (Page 20)

Using Simulator Mode
Simulator Mode is great for practicing with the unit if you are
indoors or when satellite signals are not available. All waypoints and
routes created in Simulator Mode are retained in memory for future
use.
By unplugging the GXM 30 antenna and placing the unit in
Simulator Mode, you can view simulated weather information.
NOTE: Do not try to navigate using Simulator Mode. When the
unit is set to Simulator Mode, the GPS receiver is turned off.
Any satellite signal strength bars shown are only simulations and
do not represent the strength of actual satellite signals.
To turn on Simulator Mode:
1. Highlight the GPS tab on the Main Menu.
2. Press MENU to open the GPS tab options menu.
3. Highlight Start Simulator, and press ENTER.
GPS tab
Starting Simulator Mode from the GPS tab
Entering a New Location
Use the GPS options menu to enter a new location from which to
simulate.
To enter a New Location using the map:
1. Highlight the GPS tab on the Main Menu.
2. Press MENU to open the options menu.
3. Highlight New Location, and press ENTER.
4. Highlight Use Map, and press ENTER.
5. Use the ROCKER to move the panning arrow to the location
you want on the map, and press ENTER.
12 GPSMAP 378/478 Owner’s Manual
g
ettIng
s
tArted
> u
sIng
s
IMulAtor
M
ode