Garmin GPSMAP 190-00683-00 - Manual (Page 74)

Trip Computer Page
The Trip Computer Page shows important data while navigating a
route in Automotive Mode. It indicates your current speed and other
data about your trip, such as average speed and moving time.
Trip Computer Page
Reset the Trip Computer before beginning a trip. If you make
frequent stops, leave the GPSMAP 378/478 turned on in order to
receive satellites. This allows the unit to accurately measure elapsed
time during the trip.
Trip Computer Page Options Menu
Press MENU to open the options menu. Highlight an option, and
press ENTER.
Trip Computer Page Options Menu
Set Up Page Layout—choose the layout and number of data fields.
Change Nearest Type—allows you to specify the type of item to
be used as the nearest item [shown in the lower-left data field of the
Position Data (2 Columns) layout]. The choices change based on
the current Usage Mode.
Reset (Trip, Max Speed, Odometer, All)—options to reset the
maximum speed, the odometer, everything but the max speed and
odometer, or reset everything in the trip computer.
 GPSMAP 378/478 Owner’s Manual
A
utoMotIve
M
ode
P
Ages
> t
rIP
c
oMPuter
P
Age