Stovax PR0919 - Manual (Page 20)

20
INSTALLATION INSTRUCTIONS
INSTALLATION
• Offer the frame to the foot of the opening
• Slide the frame to the right to locate the right hinge pin
24
AR1865
5.4 • Manoeuvre the frame up towards the left side to locate
the left hinge pin
• Slide onto the hinge with a right movement
• Secure in place with a spring clip at the right hinge pin,
Diagram 25
25
AR1862
• Close the window
5.5 Using the allen key provided:
• Close the window locks by moving from open to shut
towards the window centre
26
AR1860
6. LIGHTING THE STUDIO
Note: The Emergency Shut Off switch must be in the ON
position, refer to Section 2, User Instructions.
There are two ways of lighting the Studio:
• by thermostatic remote control
• using the fire’s touch pad
THERMOSTATIC REMOTE CONTROL
27
AR1883
This remote controls the appliance from pilot ignition
through to shut down. In ‘MANUAL MODE’ you can:
• light the pilot
• turn on the main burner
• regulate the flame from low to high and back
• turn off the burner leaving just the pilot burning
In ‘TEMP MODE’ you can:
• set the room temperature so the stove automatically
maintains that temperature
In ‘TIMER MODE’ the stove:
• turns on and off according to the set time periods
• automatically regulates the room temperature during the
set periods
TOUCH PAD CONTROL
28
AR1885