Garrett Metal Detectors Graphic Target Profiling 1350 - Manual (Page 11)

11 Graphic Target Profiling 1350
™
TOUCHPAD FUNCTIONS
The GTP 1350 has eight (8) touchpads that control
all operating functions. The battery pack and
headphone jack are located beneath the arm rest.
POWER Touchpad
Press the POWER touchpad once to turn the
detector ON or OFF. The detector will beep twice
when turned ON and once when turned OFF.
If, after making adjustments to the 1350, you wish
to return to the factory recommended settings, press
and hold the POWER touchpad for approximately
ten (10) seconds, or until the detector beeps twice.