Garrett Metal Detectors Graphic Target Profiling 1350 - Manual (Page 16)

Garrett Metal Detectors
TONE
Press the (+) or (-) touchpad to adjust the TONE,
indicated on the Lower Scale of the LCD panel.
The TONE refers to the pitch of the sound the
detector makes when a target is found.
SALT ELIMINATION
Press the (+) touchpad to activate SALT
ELIMINATION or the (-) touchpad to deactivate
(flashing) SALT ELIMINATION. The SALT
ELIMINATION MODE eliminates interference
caused by wetted salt; a feature that is particularly
helpful when hunting on saltwater beaches.
TONE ID
Press the (+) touchpad to activate the TONE ID
or the (-) touchpad to deactivate (flashing) the
TONE ID. When activated, the TONE ID feature
produces tones of varying pitches to indicate
a target’s conductivity: high conductivity targets
produce a high-pitched belltone; medium
conductivity targets produce a standard-pitched
tone; and low conductivity targets produce a low-
16