Garrett Metal Detectors Graphic Target Profiling 1350 - Manual (Page 34)

Garrett Metal Detectors
TEST PLOT CONSTRUCTION
Your own test plot section will enable you to increase
your treasure hunting proficiency. Create a test plot
by burying several items at varying depths of one
(1) to six (6) inches about 18 inches apart. Include
coins, rings, nails, foil, pull tabs and bottle caps.
Bury larger items, such as a 12 ounce soda can,
approximately ten (10) inches deep. Clearly mark
where each article is buried and its depth. Scan over
them while carefully studying the detection signals.
Newly buried objects, especially coins, will be
more difficult to detect than items buried over time.
Experiment with various detection modes and pay
close attention to audio, Target ID and Profiling
signals as you scan.
34