Garrett Metal Detectors Graphic Target Profiling 1350 - Manual (Page 43)

43 Graphic Target Profiling 1350
™
SERVICE AND REPAIR
In case of difficulty, read this Owner’s Manual
thoroughly to make certain your detector is not
inoperable due to manual adjustments (Press and
hold the POWER button for ten (10) seconds
to return to the factory recommended settings).
Contact your dealer for additional assistance.
When your detector must be returned to the factory
for service, make certain:
• You have checked batteries, switches and
connectors. (Weak batteries are the most
common cause of detector “failure”.)
• You have contacted your dealer, particularly if
you are not familiar with the GTP 1350.
• You have included a letter that fully describes
the problem and conditions under which they
occur. Make certain to include your name,
address and a phone number where you can
be contacted between 8:30 a.m. and 4 p.m.,
C.S.T.