GE 1000 User Manual
Page 21
Security Pro 1000
15
Note
Codes are always needed to
disarm the system. Depend-
ing on the panel configura-
tion, codes may be needed
to arm the system. Check
with the installer for your
system configuration.
Your system may be set up so that the master code or an access code is required when
arming. If so, the panel will prompt you to enter a code when you attempt to arm the
system.
Note
Because different codes can be entered using the same button presses, you have to use
caution when programming different codes. You need to ensure that one access code does
not use the same button presses as other access codes. For example, if the master code is
1234, do not program another code to be 2244. The panel would interpret these codes to be
the same code.
¾
How to change an Access Code:
1.
Open the cover of the panel.
2.
The panel voice prompts you to Use numbered keys to enter ID. Enter your mas-
ter access code using the numbered keys.
3.
The panel voice prompts you to Please select from START MENU. Press the Add
button on the START MENU.
4.
The panel voice prompts you to Select from MAIN MENU. Press the Access
Code button on the MAIN MENU.
5.
The panel voice responds with Master Code, press again for next access code,
DONE to select or press CANCEL to quit. Press the access code button again to
hear the next access code. When you hear the access code you wish to change
press the DONE Button.
6.
Enter 3-6 new numbers using the numbered keys. (Access Code length is pro-
grammed by the installer.)
7.
Close the panel cover.
¾
How to Delete an Access Code:
1.
Open the cover of the panel.
2.
The panel voice prompts you to Use numbered keys to enter ID. Enter your mas-
ter access code using the numbered keys.
3.
The panel voice prompts you to Please select from START MENU. Press the
Delete button on the START MENU.
4.
The panel voice prompts you to Select from MAIN MENU. Press the Access
Code button on the MAIN MENU.
5.
The panel voice responds with Access Code 1, press again for next access code,
DONE to select or press CANCEL to quit. Press the access code button again to
hear the next access code. When you hear the access code you wish to delete,
press the DONE Button. The panel voice responds with Access Code X deleted.
6.
Close the panel cover.
Light Control
You system has the ability to control lights from the panel. A specific light or group of
lights can be programmed to turn on and off at designated times.
House Code
Refers to a group of lights that can be controlled from the panel.
Note
The panel lists house codes A - O. Ask your installer what house code your lights are set up
on. Your house code for lights is ___.
Delete Access Code
Delete