GE 1000 User Manual
Page 25
Security Pro 1000
19
Delete disables sensor activated light lockout stop time. The panel will turn on a light
activated by a sensor at all times if sensor activated lights are enabled.
1.
Open panel cover. Panel announces, Use numbered keys to enter ID.
2.
Enter Access Code using the numbered keys. Panel announces, Please select from
Start Menu.
3.
Press Delete from the Start menu. Panel announces, Select from main menu
4.
Press Option #. Panel announces, Option 1, press again for next option or done to
select.
5.
Press 37. Option 37, press again for next option or done to delete.
6.
Press DONE. Panel announces, Option 37 deleted.
Option 41 - Voice Chime
The panel will verbally announce which chime sensor has been tripped if the chime
feature is on.
Add enables chime voice.
1.
Open panel cover. Panel announces, Use numbered keys to enter ID.
2.
Enter Access Code using the numbered keys. Panel announces, Please select from
Start Menu.
3.
Press Add from the Start menu. Panel announces, Select from main menu
4.
Press Option #. Panel announces, Option 1, press again for next option or done to
select.
5.
Press 41. Panel announces, Option 41, press again for next option or done to
select
6.
Press DONE. Panel announces, Option 41 is on.
Delete disables chime voice. The panel will not announce which chime sensor has
been tripped but will still chime 2 times for doors and 3 times for motion sensors when
a given sensor is tripped.
1.
Open panel cover. Panel announces, Use numbered keys to enter ID.
2.
Enter Access Code using the numbered keys. Panel announces, Please select from
Start Menu.
3.
Press Delete from the Start menu. Panel announces, Select from main menu
4.
Press Option #. Panel announces, Option 1, press again for next option or done to
select.
5.
Press 41. Panel announces, Option 41, press again for next option or done to
delete
6.
Press DONE. Panel announces, Option 41 deleted.
Option 42 - Speaker Level
When this option is turned on you can set the panel speaker level from 1 (the lowest
voice level) to 8 (the highest voice level). When you turn this option off, the speaker
level is set to 8 (the highest voice level).
Add allows you to set the speaker level from 1-8.
1.
Open panel cover. Panel announces, Use numbered keys to enter ID.
2.
Enter Access Code using the numbered keys. Panel announces, Please select from
Start Menu.
3.
Press Add from the Start menu. Panel announces, Select from main menu
4.
Press Option #. Panel announces, Option 1, press again for next option or done to
select.
5.
Press 42. Panel announces, Option 42, press again for next option or use num-
bered keys to enter option.
6.
Enter the voice level (1 - 8) with the numbered keys.
7.
Panel announces the speaker level that has been selected
Delete sets the speaker level to 8 (the highest voice level).
1.
Open panel cover. Panel announces, Use numbered keys to enter ID.