GE Triplex DVMRe 4eZT - Manual (Page 30)

0150-0198H 30 DVMRe Triplex eZ
q Main Menu → Time/Date → Set Date Format
Rotate the Jog to set the desired date format. Select from either:
• MM/DD/YY
• DD/MM/YY
• YY/MM/DD
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
q Main Menu → Time/Date → Time / Date Display
Use this menu to specify if the time and date will be displayed on:
• Monitor-A.
• Monitor-B.
• Both Monitors.
• Not Displayed
Rotate the Jog to navigate, then rotate the Shuttle to change the values.
Save changes and exit the menu: Select [OK], then press the Enter button.
Exit the menu without making changes: Press the Menu button, or select [CANCEL], then press
the Enter button.
q Main Menu → Time/Date → Set Region
Use this menu to set the region for the Auto Daylight Savings Time
feature. Choices are:
• OFF: Clock will not be changed automatically, but can still
be adjusted by one hour using the daylight saving macros.
• USA: DST starts at 02:00 on the first Sunday in April.
DST ends at 02:00 on the last Sunday in October.
Includes: United States (except Hawaii, American Samoa,
Guam, Puerto Rico, Virgin Islands, parts of Indiana and
Arizona) and Canada (except Saskatchewan).
• EUR: DST starts at 01:00 GMT on the last Sunday in
March. DST ends at 01:00 GMT on the last Sunday in
October. Includes: European Union Countries.
• AUS: DST starts at 02:00 on the last Sunday in October. DST ends at 03:00 on the last Sunday
in March. Includes: South Australia, Victoria, ACT, NSW. Excludes: Tasmania.
The Time Zone must be set correctly to ensure that the DST adjustments are made at the right time. It is
also required for accurate email time stamping.
The clock will only be automatically adjusted once on a given time and date. If you manually
set the clock back before the last DST change, the time will not get automatically adjusted
again for that same time change.
Time/Date Display
Monitor A :
Monitor B : ON
[CANCEL] [OK]
ON
Date Format Setup
Select Format
MM/DD/YY
Daylight Saving :
Time Zone :
SUN, 7 APR 2002 02:00 (+1)
SUN, 27 OCT 2002 02:00 (-1)
GMT+00:00
USA
Regional Settings
[CANCEL] [OK]
NOTE