4 unpacking, 5 installation environment – GE Triplex DVMRe 4eZT User Manual

Page 8

Advertising
background image

0150-0198H

8

DVMRe Triplex eZ

Ten and Sixteen-Channel Units

Password

Type

Access

Level

Function

Changeable

by user?

Default

Password

Operator Operator

Provides access to the Operator

menu.

Yes

Press ‘ENTER’

4 Times

Installer

Installer

Provides access to all on-screen

menus.

Yes

3 4 7 7

Factory

Defaults

Installer

Resets the multiplexer to the

factory defaults (except the time,

date, email addresses, and email

IP address).

No

8 1 1 1

Language Installer

Provides access to the On-screen

Language menu.

No

5 4 1 5

Ethernet

Access

Reset

Installer

Deactivates the ethernet

password, so that any PC

equipped with WaveReader may

access the unit.

No

1 1 1 1

1.4 Unpacking

Check the package and contents for visible damage. If any components are damaged or missing, do

not attempt to use the unit, contact the supplier immediately. If the unit must be returned, it must be
shipped in the original packing box.

Package Contents

The DVMRe Triplex eZ unit.

The Alarm Interface Circuit Board (P/N 0090-0077).

The User Manual (P/N 0150-0198).

Accessory PCB (P/N 0900-0127). Audio equipped models only.

A WaveReader Software CD (P/N 0151-0005-25W11).

The WaveReader Software Manual (P/N 0150-0143).

The Archiving Addendum (P/N 0150-0194).

WaveWatch User Manual (P/N 0150-0189).

Power Supply (P/N 4310-0020).

Power Cords (120 VAC P/N 4310-0002) and (220 VAC P/N 4310-0001).

1.5 Installation Environment

Power: Ensure that the installation site’s AC power is stable and within the rated voltage of the 12

Volt DC power supply. If the site’s AC power is likely to have spikes or power dips, use power line
conditioning or an Uninterruptable Power Supply (UPS).

Ventilation: Ensure that the location planned for the installation of the unit is well ventilated. Take
note of the locations of the cooling vents in the unit’s enclosure, and ensure that they are not
obstructed.

Temperature: Consider the unit’s operating temperature (0 to 40 °C) and non-condensing humidity

specifications (10% to 80%) before choosing an installation location. Extremes of heat or cold beyond

Advertising
This manual is related to the following products: