GE Triplex DVMRe 4eZT - Manual (Page 41)

0150-0198H 41 DVMRe Triplex eZ
3. When finished programming, press the Function button then the Enter button to end the macro
recording. A form is provided in section 10 to keep track of recorded macro functions.
Keystroke count while in the menu system: While recording a macro, entering the
menu system, changing multiple menu items, and exiting the menu system are only
counted as one keystroke. Using the Jog to navigate the menu system does not count
as keystrokes. Once the menu system has been exited, re-entering the menu system
will count as a second keystroke.
Not all menu items can be programmed using macros. For a complete list of macro
programmable menu items, see the table below.
During macro recording, the following button combinations perform special functions.
Button Sequence Resulting Action
Function then 1. Activate Relay 1 output.
Function then 2. Reset Relay 1 output.
Function then 3. Pause macro for 1 second.
Function then 4. Pause macro for 5 seconds.
Function then 5. Activate Relay 2 output.
Function then 6. Reset Relay 2 output.
Function then Enter. End macro recording
Macro Excluded Features
The following core features or settings cannot be programmed by Macro.
• Disk Maintenance.
• Erase Archive Medium.
• POTS Setting.
• Ethernet Setting.
• RS485 Network Address.
• Front Panel Lock/Unlock.
• Record Timer.
Running A Macro
{F} 1
A macro is a recorded sequence of up to 32 keystrokes. To activate a
macro, press the Function button followed by the Number button of the
desired macro. While running, the macro is indicated on-screen as the letter
F and the macro number.
The user can cancel the macro at any time by pressing the Function button.
Function and
Number Buttons
Daylight Savings Time (Alternate Method)
{F}
To adjust the time one hour for daylight savings time, press the Function
button, then the Sequence button. If this function is activated during April,
one hour is added to the time. If this function is activated in October, one
hour is subtracted from the time. This function will only operate once per
time period.
Function and
Sequence Buttons
NOTE