GE Triplex DVMRe 4eZT - Manual (Page 53)

0150-0198H 53 DVMRe Triplex eZ
Available Languages:
English French German
Italian Russian Polish
Czech Finnish Hungarian
Slovak Spanish Dutch
Danish
3.19 Passwords
Use this feature to change the Installer, Operator or Ethernet passwords.
Changing the Installer or Operator Passwords
To change the password:
1. Highlight the password you wish to change, then press the
Enter button. A password box will appear.
2. Enter the new password using the Number buttons.
3. Highlight OK, then press the Enter button.
4. Re-enter the password.
5. Highlight OK, then press the Enter button. The user will be
prompted, indicating if the password was entered correctly
and changed.
The Ethernet Password
The Ethernet Password feature limits access to only those
users who access the unit using the password feature of
WaveReader versions 2.4 or later. When the unit is first setup,
the default is No Password Protection. Meaning, anyone
using WaveReader and accessing with an ethernet connection
can connect to the unit.
Activate The Ethernet Password
1. Enter the new password using the Number buttons.
2. Highlight OK, then press the Enter button.
3. Re-enter the password.
4. Highlight OK, then press the Enter button. The user will be prompted, indicating if the password was
entered correctly and changed.
Password Box
Enter a new Install Password
- ---
Installer Password
Operator Password
Ethernet Password
Password Box
Enter a new Ethernet Password
- ---