GE 23200 - Manual (Page 11)

11
Programming the Handset
Handset Name
1. Make sure the cordless handset is OFF (not in talk mode).
2. Press the prog/mute button to go to the main menu.
3. Press CID/vol orbuttons to scroll to HANDSET SETUP.
4. Press prog/mute button to confirm.
5. Press the CID/vol orbuttons button to scroll to the HANDSET NAME menu.
6. Press prog/mute button to enter the menu. HANDSET NAME shows in the display.
7. Use the touch-tone pad to enter a name (up to 15 characters). More than one letter is stored in
each of the number keys. For example, to enter Bill Smith, press the 2 key twice for the letter
B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L. Press the 5 key
3 times for the second letter L, and press the 1 key to insert a space between the first and last
name. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press the 4
key 3 times for the letter I; press the 8 key for the letter T; press the 4 key twice for the letter H.
NOTE: If you make a mistake, use the delete button to backspace and delete one character
at a time.
8. Press the prog/mute button to save your name. You will hear a confirmation tone and the
handset name shows in the display.
Ringer Tone
You may choose from ten different ringer tones and ten different melodies.
1. Make sure the cordless handset is OFF (not in talk mode).
2. Press the prog/mute button to go to the main menu.
3. Press CID/vol orbuttons to scroll to HANDSET SETUP.
4. Press prog/mute button to confirm.
5. Make sure the ringer is turned on. See Ringer Volume section.
6. Press the CID/volorbuttons to scroll to the RINGER TONE menu.
7. Press prog/mute button to enter the menu. SET RINGER TONE 01 shows in the display. 01 is
default setting.
8. Use the CID/vol orbuttons to scroll to the desired setting (1 through 20). You will hear a
sample of the ringer tone/melody you select.
9. Press the prog/mute button to save your selection. You will hear a confirmation tone and the
selected ringer tone shows in the display.