GE 23200 - Manual (Page 6)

6
Connections & Setup
Parts Checklist
Make sure your package includes the items shown here.
Handset Belt clip
(5-2661)
Recharge cradle
(5-2671)
Handset Battery
(5-2670)
Battery compartment
cover
Installation
INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause or receive
interference with nearby TVs, microwave ovens, and VCRs. To minimize or prevent such interference, the
base of the cordless telephone should not be placed near or on top of a TV, microwave ovens, or VCR. If such
interference continues, move the cordless telephone farther away from these appliances. Certain other
communications devices may also use the 2.4 GHz frequency for communication, and, if not properly set,
these devices may interfere with each other and/or your new telephone. Typical devices that may use the 2.4
GHz frequency for communication include wireless audio/video senders, wireless computer networks, multi-
handset cordless telephone systems, and some long-range cordless telephone systems.
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
• Never touch non-insulated telephone wires or terminals, unless the telephone line has been
disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Temporarily disconnect any equipment connected to the phone such as faxes, other phones,
or modems.
Installation Guidelines
• Install telephone near both a telephone (modular) jack and an electrical power outlet.
• Avoid sources of noise, such as a window by a busy street, and electrical noise, such as motors,
microwave ovens, and fluorescent lighting.
• Avoid heat sources, such as heating air ducts, heating appliances, radiators, and direct sunlight.
• Avoid areas of excessive moisture or extremely low temperature.
• Avoid dusty locations.
• Avoid other cordless telephones or personal computers.