Document Outline

• Table of Contents
  • 1 - Getting Started 1
  • 2 - Connections 7
  • 3 - Setup 11
  • 4 - Basic Operations 21
  • 5 - Advanced Features 25
  • 6 - Help 33
• Chapter 1 Getting Started
  • :: Welcome
    • Compatible Discs
  • :: System Overview
    • Remote Control
      • 1 DISPLAY
      • 2 POWER
      • 3 0-9
      • 4 CLEAR
      • 5 PROGRAM
      • 6 A-B
      • 7 REPEAT
      • 8 MUTE
      • 9 VOLUME +/-
      • 10 SETUP
      • 11 ENTER
      • 12 TITLE
      • 13 PLAY
      • 14 STOP
      • 15 TUNING-/SCAN BACKWARD AA
      • 16 TUNING+/SCAN FORWARD ""
      • 17 AM/FM
      • 18 ST/MONO
      • 19 SLOW
      • 20 ANGLE
      • 21 GO TO
      • 22 EJECT
      • 23 FUNCTION
      • 24 TEST TONE
      • 25 ZOOM
      • 26 TRIM
      • 27 SOUND
      • 28 L/R
      • 29 DISC MENU
      • 30 ARROW KEYS Y/B/A/"
      • 31 RETURN
      • 32 PAUSE/STEP
      • 33 PRESET+/SKIP FORWARD ""|
      • 34 PRESET-/SKIP BACKWARD |AA
      • 35 BASS/TREB
      • 36 MEMORY
      • 37 AUDIO
      • 38 SUBTITLE
    • Front Panel Controls
      • 1 POWER
      • 2 Disc Tray
      • 3 Sensor
      • 4 Front Panel Display
      • 5 ENTER & ARROW KEYS Y/B/A/"
      • 6 VOLUME/CONTROL
      • 7 FUNCTION
      • 8 EJECT
      • 9 STOP
      • 10 PLAY/PAUSE
      • 11 SKIP BACKWARD |AA/PRESET-
      • 12 SKIP FORWARD ""|/PRESET+
      • 13 AM/FM
      • 14 SOUND
    • Front Panel Display
      • 1 DVD Status Indicator
      • 2 DVD Video Indicator
      • 3 Repeat Status Indicator
      • 4 AB Repeat Indicator
      • 5 Title Number Indicator
      • 6 Track Number Indicator
      • 7 Chapter Number Indicator
      • 8 Program Indicator
      • 9 Tuner Indicator
      • 10 DTS Indicator
      • 11 Dolby Digital Indicator
      • 12 KHz Indicator
      • 13 MHz Indicator
      • 14 Speaker Status Indicator
      • 15 Playback Status Indicator
      • 16 Pause Indicator
      • 17 Elapsed Time Indicator
    • Rear Panel
      • 1 Subwoofer Output
      • 2 Video Out
      • 3 Optical Output
      • 4 S-Video Output
      • 5 AM Antenna Input
      • 6 Video 1 Input
      • 7 Video 2 Input
      • 8 Video 2 Output
      • 9 Speaker Outputs (RS, R, C, SUB, L, LS)
      • 10 FM75W Antenna Input
• Chapter 2 Connections
  • :: Connecting the System
    • Step 1 - Connect TV
      • Composite Video
      • S-Video
    • Step 2 - Place Speakers
      • Front Speakers (L, R)
      • Center Speaker (C)
      • Rear Speakers (LS, RS)
      • Subwoofer (SUB)
    • Step 3 - Connect Speakers
      • 1 Make sure the power is turned off to prevent possible damage to the system.
        • 2 Connect each pair of speaker wires to the red and black connectors on the back of each speaker,...
        • 3 To insert a speaker wire, press down on the red or black thumb lever, insert the tip of the wir...
    • Step 4 - Connect AM Loop Antenna
      • 1 Assemble the supplied AM loop antenna by rotating the base and snapping it into place.
        • 2 Connect the two wires from the AM loop antenna to the AM Antenna connector on the back panel. P...
    • Step 5 - Connect FM Wire Antenna
      • 1 Connect the supplied FM wire antenna to the FM 75W Antenna connector on the back panel.
        • 2 Be sure to fully extend the FM wire antenna. Make use of the small loop at the free end of the ...
        • 3 If noise or interference occurs, use an external antenna with a 75W coaxial cable (not included).
    • Step 6 - Connect External Audio/Video Components (Optional)
      • Video 1 Input
      • Video 2 Input
      • Video 2 Output
      • Sub Output
      • Optical Output
    • Step 7 - Power on the System
      • 1 Connect the power cord to a standard 120VAC/60Hz electrical outlet.
        • 2 The red Standby LED will glow on the front panel to indicate that the system is plugged in and ...
        • 3 Press the POWER button on the front panel or the remote control to power on the unit.
      • About Standby Mode
• Chapter 3 Setup
  • :: Setup Menu Overview
    • Setup Menu Categories
      • 1 For Language Setup; see page12.
        • 2 For Video Setup; see page14.
        • 3 For Audio Setup; see page14.
        • 4 For More Audio Setup; see page17.
        • 5 For Rating Setup; see page18.
    • Setup Menu Navigation
      • SETUP
      • A/"
      • ENTER
      • Y
      • B
      • RETURN
  • :: Language Setup
    • OSD Menu Language
      • 1 Press SETUP.
        • 2 Select Language and press ENTER.
        • 3 Select OSD Menu and press ENTER.
        • 4 Set the desired OSD Menu Language to English (default), French or Spanish and press ENTER.
        • 5 Press SETUP to save and exit.
    • Subtitle Language
      • 1 Press SETUP.
        • 2 Select Language and press ENTER.
        • 3 Select Subtitle and press ENTER.
        • 4 Set the desired Subtitle Language to English (default), French or Spanish and press ENTER.
        • 5 Press SETUP to save and exit.
    • Audio Language
      • 1 Press SETUP.
        • 2 Select Language and press ENTER.
        • 3 Select Audio and press ENTER.
        • 4 Set the desired Audio Language to English (default), French or Spanish and press ENTER.
        • 5 Press SETUP to save and exit.
    • Disc Menu Language
      • 1 Press SETUP.
        • 2 Select Language and press ENTER.
        • 3 Select Disc Menu and press ENTER.
        • 4 Set the desired Disc Menu Language to English (default), French or Spanish and press ENTER.
        • 5 Press SETUP to save and exit.
  • :: Video Setup
    • TV Aspect
      • 1 From Stop mode, press SETUP.
        • 2 Select Video and press ENTER.
        • 3 Select TV Aspect and press ENTER.
        • 4 Select the desired TV Aspect and press ENTER:
        • Fullscreen
        • Letterbox
        • Widescreen
          • 5 Press SETUP to save and exit.
  • :: Audio Setup
    • Dolby Digital Setting
      • 1 Press SETUP.
        • 2 Select Audio and press ENTER.
        • 3 Select Dolby D and press ENTER.
        • 4 Set Analog Out (from Video 2 Out) to:
        • 6 Channel
        • 2 Channel
        • To output downmixed 2 channel stereo; e.g. to a VCR or TV.
          • 5 Set Digital Out (from Optical Out) to:
        • PCM
        • Bitstream
        • Off
          • 6 Press SETUP to save and exit.
    • DTS Setting
      • 1 Press SETUP.
        • 2 Select Audio and press ENTER.
        • 3 Select DTS and press ENTER.
        • 4 Set Analog Out (from Video 2 Out) to:
        • 6 Channel
        • 2 Channel
        • To output downmixed 2 channel stereo; e.g. to a VCR or TV
        • Off
          • 5 Set Digital Out (from Optical Out) to:
        • PCM
        • Bitstream
        • Off
          • 6 Press SETUP to save and exit
    • MP3 Setting
      • 1 Press SETUP.
        • 2 Select Audio and press ENTER.
        • 3 Select MP3 and press ENTER.
        • 4 Set Digital Out (from Optical Out) to:
        • PCM
        • Off
          • 5 Press SETUP to save and exit
    • CD/VCD Setting
      • 1 Press SETUP.
        • 2 Select Audio and press ENTER.
        • 3 Select Others and press ENTER.
        • 4 Set Analog Out (from Video 2 Out) to:
        • 2 Channel
        • (default) To output 2 channel stereo. Enables use of the L/R button during VCD playback; see page...
        • 6 Channel
          • 5 Set Digital Out (from Optical Out) to:
        • PCM
        • Bitstream
        • Off
          • 6 Press SETUP to save and exit.
  • :: More Audio Setup
    • Pro Logic Setting
      • 1 Press SETUP.
        • 2 Select More Audio and press ENTER.
        • 3 Select Pro Logic and press ENTER.
        • 4 Select the desired Pro Logic setting and press ENTER:
        • Auto
        • On
        • Off
          • 5 Press SETUP to save and exit.
    • L/R Speaker Setting
      • 1 Press SETUP.
        • 2 Select More Audio and press ENTER.
        • 3 Select L/R Speaker and press ENTER.
        • 4 Select the desired Left/Right Speaker size and press ENTER:
        • Small
        • Large
          • 5 Press SETUP to save and exit.
  • :: Rating Setup
    • Setting the Password & Rating Level
      • 1 Press SETUP.
        • 2 Select Rating and press ENTER.
        • 3 Select Rating and press ENTER repeatedly to set the rating from 1 (most restrictive) to 8 (leas...
        • 4 Select Password.
        • 5 Use the 0-9 keys to enter a 4-digit password and press ENTER. The lock icon will close to indic...
        • 6 Press SETUP to save and exit.
  • :: Speaker Setup
    • Adjusting Speaker Balance/Levels
      • Test Tone Generator
      • Trim Level
      • Volume Level
      • Test Tone Generator
        • 1 To use the Test Tone generator, a DVD disc must be loaded and the player must be in Stop mode.
          • 2 Press TEST TONE on the remote control. A “white noise” test tone is automatically sent to each ...
          • 3 Press the VOLUME +/- buttons on the remote control to adjust the volume level for each speaker.
          • 4 When finished, press the TEST TONE button to stop the test tone and save your settings.
      • Trim Levels
        • 1 To use the Trim feature, a DVD disc must be loaded and playing.
          • 2 Press the TRIM button on the remote control to cycle through the six speakers in the following ...
          • 3 Press the VOLUME +/- buttons on the remote control to fine-tune the volume level for each speaker.
      • Volume Level
• Chapter 4 Basic Operations
  • :: First Things First
    • 1 DVD Function
      • 2 Tuner Function
      • 3 Video 1 Function
      • 4 Video 2 Function
  • :: Basic Disc Playback
    • Playing a DVD, CD or VCD
      • 1 Turn on the TV and make sure the TV’s video input source is set to view the DVD system.
        • 2 Press the POWER button on the remote control or front panel to wake up the DVD system from stan...
        • 3 Press EJECT on the remote control or front panel to open the disc drawer.
        • 4 Place the disc in the drawer with the label side facing up and playback side facing down. If th...
        • 5 Press EJECT again to close the disc drawer.
        • 6 Adjust the volume of the system with the VOLUME +/- buttons on the remote control, or by using ...
    • Disc Menu Navigation
      • DISC MENU
      • A/"/Y/B
      • ENTER
      • 0-9
      • RETURN
    • Additional Disc Playback Options
  • :: Basic Tuner Operation
    • Presetting Radio Stations
      • 1 Before you begin, turn the volume down on the system to avoid sudden and excessive noise from t...
        • 2 Press the FUNCTION button to switch to the Tuner (AM/FM) function.
        • 3 Press the AM/FM button to select the desired band.
        • 4 Press and hold TUNING + or - until the frequency starts to change, then release.
        • 5 Scanning stops when the system tunes in a station. “Tuned” appears on the front panel display.
        • 6 Press MEMORY. “Mem To - -” appears on the front panel display.
        • 7 Use the 0-9 keys to enter a number from 01 to 15.
        • 8 Press ENTER to confirm the memory number. The station is stored.
        • 9 Repeat steps 3 to 8 to preset up to 15 stations in each band.
    • Listening to the Radio
      • 1 Press the FUNCTION button to switch to the Tuner (AM/FM) function.
        • 2 To select a preset station, press the PRESET +/- buttons on the remote control to skip to the n...
        • 3 To change tuner bands, press the AM/FM button to toggle between AM and FM.
        • 4 To tune in non-preset stations, press the TUNING +/- buttons on the remote control:
        • 5 To improve reception, relocate the supplied antennas.
    • Adjusting Stereo/Mono
    • Adjusting Bass/Treble
• Chapter 5 Advanced Features
  • :: Special Playback Features
    • Display
      • 1 Press DISPLAY once to view elapsed/remaining time.
        • 2 Press DISPLAY twice for detailed disc information, including disc type, title number, chapter n...
        • 3 Press DISPLAY three times to turn off the display.
    • Go To
      • 1 Press GO TO during DVD/CD playback.
        • 2 Use the arrow keys to select Time, Title, Chapter or Track
        • 3 Use the 0-9 keys to enter the desired Time (counter position), Title number or Chapter.
        • 4 Press ENTER to jump to the desired Time, Title or Chapter/Track.
    • Title
      • 1 Press the TITLE button on the remote control.
        • 2 Press the arrow keys or the 0-9 buttons to select a title for playback.
        • 3 Press ENTER to start playback of the selected title.
    • Angle
      • 1 Press ANGLE when you see the Angle icon appear on screen during DVD playback.
        • 2 Continue to press ANGLE to select among all available angles on the disc.
    • Zoom
      • 1 Press ZOOM during DVD playback to display the magnifying glass.
        • 2 Continue to press ZOOM to magnify the image at 3 levels of magnification.
    • Subtitle
      • 1 Press SUBTITLE during DVD playback.
        • 2 Continue to press SUBTITLE to select among all available subtitle languages.
    • Audio
      • 1 Press AUDIO during DVD playback.
        • 2 Continue to press AUDIO to select among all available audio formats.
    • Repeat
      • 1 Press REPEAT during disc playback.
        • 2 Continue to press REPEAT to select Repeat Title, Repeat Chapter, or Off (DVD); or Repeat Single...
        • 3 To quit Repeat Play, press REPEAT until Off appears on the screen.
    • A-B Repeat
      • 1 Press A-B during DVD/CD playback to select point A.
        • 2 Press A-B again to select point B.
        • 3 The segment will begin repeating in a continuous loop.
        • 4 To cancel, press A-B again. “Off” appears on the screen.
    • Program Playback
      • 1 Press PROGRAM while a DVD/CD is in Stop mode.
        • 2 Use the arrow keys to move the cursor to one of the 12 empty placeholders.
        • 3 Use the 0-9 keys to enter the number of the title/chapter or track you wish to add to your play...
        • 4 Repeat this process until all chapters/tracks are added in the desired order.
        • 5 When finished, move the cursor to Play Program and press ENTER. The disc will play in the progr...
        • 6 To cancel Programmed Play, press STOP and then press CLEAR.
    • Enhance Video Setting
      • 1 During playback, press SETUP.
        • 2 Select Brightness or Edges, and press ENTER to set as follows:
        • Brightness
        • Adjusts the overall brightness of the picture. Choose On or Off.
        • Edges
          • 3 Press SETUP to save and exit.
  • :: VCD Playback
    • Playing VCDs
      • 1 Insert a VCD with PBC and press PLAY.
        • 2 As playback starts, the PBC menu appears on the screen.
        • 3 Use the arrow keys or the 0-9 key to select the desired track number.
        • 4 Press ENTER to confirm your selection.
        • 5 Follow the instructions in the PBC menu or supplied with the disc for special interactive featu...
        • 6 To return to the PBC menu during playback, press the RETURN button.
    • Sound
      • 1 Press SOUND to view the current EQ setting during VCD or CD audio playback:
        • 2 Continue to press SOUND to change the EQ to FLAT, POP, ROCK, JAZZ or CLASSIC .
    • L/R Button
      • 1 Before you begin, CD/VCD must be set to 2 Channel in the Setup/Audio menu; see page16.
        • 2 Press L/R to view the current L/R audio setting.
        • 3 Press L/R repeatedly to set the VCD/CD audio output to STEREO, LEFT, RIGHT or MIX (mix of left ...
  • :: MP3 Playback
    • 1 Insert a CD-R/CD-RW disc with MP3 files into the DVD disc tray.
      • 2 Press DISC MENU to view a list of the contents of the disc.
      • 3 To play a track, use the arrow keys to navigate to the desired track and press ENTER to select....
      • 4 To skip to the next or previous track, press SKIP FORWARD/BACK.
      • 5 To stop playback, press STOP.
• Chapter 6 Help
  • :: Troubleshooting
    • Customer Service Information
      • Phone
      • E-Mail
      • Web
    • Frequently Asked Questions
  • :: Technical Specifications
    • Amplifier Section
      • Stereo Mode
      • Surround Mode
      • Inputs (Analog)
      • Outputs (Analog)
      • Outputs (Digital)
    • DVD System
      • Laser
      • Signal Format System
      • Frequency response
      • Signal-to-noise ratio
      • Harmonic distortion
    • FM Tuner Section
      • System
      • Tuning range
      • Antenna
      • Antenna terminals
      • Intermediate frequency
    • AM Tuner Section
      • System
      • Tuning range
      • Antenna
    • Video Section
      • Video Input
      • Video Output
      • S-Video Output
    • Front Speakers
      • Speaker Unit
      • Rated Impedance
      • Dimensions (approx.)
      • Mass (approx.)
    • Center/Rear Speakers
      • Speaker Unit
      • Rated Impedance
      • Dimensions (approx.)
      • Mass (approx.)
    • Subwoofer
      • Speaker System
      • Speaker Unit
      • Rated Impedance
      • Dimensions (approx.)
      • Mass (approx.)
    • General
      • Power Requirements
      • Power Consumption
      • Dimensions (approx.)
      • Mass (approx.)
      • Operating Temperature
      • Operating Humidity
  • :: Warranty
    • Who Provides the Limited Warranty
    • Who is Protected
    • What is Covered and How Long
    • What the Owner Must Do If Service is Required
    • What are the Exceptions
    • Go-Video Warranty Administrator
  • :: Safety
    • Important Safety Instructions
      • 1 Read Instructions
      • 2 Retain Instructions
      • 3 Heed Warnings
      • 4 Follow Instructions
      • 5 Cleaning
      • 6 Attachments
      • 7 Water and Moisture
      • 8 Accessories
      • 9 Ventilation
      • 10 Power Sources
      • 11 Grounding or Polarization
      • 12 Power–Cord Protection
      • 13 Protective Attachment Plug
      • 14 Outdoor Antenna Grounding
      • 15 Lightning
      • 16 Power Lines
      • 17 Overloading
      • 18 Object and Liquid Entry
      • 19 Servicing
      • 20 Damage Requiring Service
      • 21 Replacement Parts
      • 22 Safety Check
      • 23 Wall or Ceiling Mounting
      • 24 Heat
    • Safety/Regulatory Information
      • Caution
      • WARNING:
      • CLASS 1 LASER PRODUCT
      • Note to CATV System Installer
      • User/Installer Caution
      • Cuidado
      • Attention
    • Notes about Discs
      • On handling discs
      • On cleaning discs
        • 0-9
        • A
        • B
        • C
        • D
        • E
        • F
        • G
        • L
        • M
        • O
        • P
        • R
        • S
        • T
        • V
        • W,X,Y,Z
  • :: Setup Menu Tree