GoVideo DHT7000 - Manual (Page 36)

30
DHT7000 Home Theater System
:: VCD Playback
Playing VCDs
VCDs with PBC (Playback Control) allow you to navigate VCD disc menus and select individual tracks for playback.
1
Insert a VCD with PBC and press PLAY.
2 As playback starts, the PBC menu appears on the screen.
•
VCD 1.1 does not support PBC functions.
3 Use the arrow keys or the 0-9 key to select the desired track number.
4 Press ENTER to confirm your selection.
5 Follow the instructions in the PBC menu or supplied with the disc for special interactive features.
•
Features vary from disc to disc.
6 To return to the PBC menu during playback, press the RETURN button.
Sound
The SOUND button on the remote control offers five preset EQ settings for use during VCD or CD audio playback.
1
Press SOUND to view the current EQ setting during VCD or CD audio playback:
2 Continue to press SOUND to change the EQ to FLAT, POP, ROCK, JAZZ or CLASSIC.
L/R Button
The L/R (Left channel/Right channel) button on the remote control allows you to manually set the Audio Output of
VCD/CDDA discs.
1
Before you begin, CD/VCD must be set to 2 Channel in the Setup/Audio menu; see page 16.
2 Press L/R to view the current L/R audio setting.
• The PBC function can be switched off by pressing the DISC
MENU button on the remote control. This button toggles PBC
on and off during VCD playback.
• If the PBC status is changed from off to on, playback might
restart from the beginning of the VCD disc.
• When the PBC function is switched off, the RETURN button
will not work. Depending on the structure of the VCD, the SKIP
FORWARD/BACKWARD buttons may not work either.