GoVideo DHT7000 - Manual (Page 15)

9
Connections
G
e
tting
Sta
rted
Se
tu
p
Basi
c
Ope
rations
Ad
vanc
e
d
Fe
atures
He
lp
Step 5 - Connect FM Wire Antenna
1 Connect the supplied FM wire antenna to the FM 75 Ω Antenna connector on the back panel.
2 Be sure to fully extend the FM wire antenna. Make use of the small loop at the free end of the antenna to maintain its position.
3 If noise or interference occurs, use an external antenna with a 75 Ω coaxial cable (not included).
Step 6 - Connect External Audio/Video Components (Optional)
The back panel of the DVD System provides five additional
inputs and outputs you can use to connect external audio/
video components, such as a VCR, satellite receiver or
powered subwoofer.
Video 1 Input Connect from the outputs of a VCR
(or other audio/video component) with coaxial cables.
This input enables you to enjoy Pro Logic surround
sound from videotapes playing in your VCR.
Video 2 Input Connect from a satellite receiver or
cable box with coaxial cables. This input enables you to
enjoy surround sound from television broadcasts.
Video 2 Output Connect to the inputs of your TV,
VCR (or other audio/video component) with coaxial
cables. Be sure to set the correct output format of the
audio signal for your component; see “Audio Setup” on
page 14.
Sub Output Connect to a powered subwoofer (not
included) with a coaxial cable.
Optical Output Connect to a digital recorder, such
as a MiniDisc recorder, with an optical cable. Be sure
to set the correct output format of the audio signal for
your component; see “Audio Setup” on page 14.
• After connecting the FM wire antenna, keep it as hori-
zontal as possible. The antenna is directional, so you
may need to move it around to get the best reception.