Gateway 9715 - Manual (Page 103)

98 www.gateway.com
Chapter 4: Installing Components
PCI expansion cards
Your server uses the PCI-X bus. Use the following chart to determine the PCI slot into
which you should install your expansion card.
Caution
Only PCI cards in slots 1 - 5 are hot-swappable. Do not attempt to
install or remove PCI cards in slots 6 or 7 without turning off your
server and disconnecting it from the AC power source.
PCI slot Description
1 PCI Express x8 - Hot-swap
2 PCI-X - Runs at 64-bit /133MHz - Hot-swap
3 PCI Express x4 - Hot-swap
4 PCI Express x4 - Hot-swap
5 PCI Express x4 - Hot-swap
6 PCI-X - Runs at 64-bit/100 MHz - Not hot-swappable
7 PCI-X - Runs at 64-bit/100 MHz - Not hot-swappable
PCI slot 3
PCI slot 4
PCI slot 5
PCI slot 7
PCI slot 6
PCI slot 2
PCI slot 1
8510702.book Page 98 Thursday, July 7, 2005 11:21 AM