Gateway 9715 - Manual (Page 44)

39 www.gateway.com
System administration
Server security
To prevent unauthorized use of the server, you can set BIOS startup passwords.
Using BIOS security passwords
Set up a supervisor password to prevent unauthorized access to the BIOS Setup utility. After
you create a supervisor password, you can set up a user password to prevent unauthorized
access to the server.
Control the
server Boot flags (select from available boot
flags)
■ Set the flag — one time reboot
■ Reboot the system
Configure boot order
Power control
■ Power on
■ Power off (graceful or hard)
Power control
Control the power state by creating button
pushes — as if performed on the front panel
by the user.
Reset Power control
IPMI control
■ Power on
■ Power off (graceful or hard)
IPMI control
Send the chipset a power control command.
The same functionality as if done over LAN
or by GSM.
IPMI command screen
■ Issue an IPMI command (text or hex)
Issue an IPMI command
Set up the server Language selection (display loaded
language files) Select the LCP display language
Status setup
■ Interval timing (set time to retrieve
status)
■ Subsystem mask (mask off
subsystems)
Set sensor refresh interval
Password setup
■ Password exists/does not exist
■ Create/change password
Password setup
Remote access rights
■ View (grant or deny)
■ Write (grant or deny)
■ Buttons (grant or deny)
Remote access control
Menu Options Description
8510702.book Page 39 Thursday, July 7, 2005 11:21 AM