Gateway 9715 User Manual
Page 28
23
www.gateway.com
Controlling your server
To configure the console:
1
Turn on the console system and let the operating system start.
2
Click
Start
,
All Programs
,
Accessories
,
Communications
, then click
Hyperterminal
.
3
When the Connection Description window opens, enter Guest in the
Name
field, then
click
OK
.
4
When the Connect To window opens, click the COM port of the console to which the
null modem cable is connected (for example, COM1).
5
When the COM1 Properties window opens, make the following settings:
■
Bits per second to
115200
■
Flow control to
Hardware (CTS/RTS)
■
Leave the other settings at their default values
6
Click
OK
to accept the settings and enter the hyperterminal screen.
7
Turn on the server. The console starts displaying the redirection after the video on
the server synchronizes.
8510702.book Page 23 Thursday, July 7, 2005 11:21 AM