Grizzly G9249 - Manual (Page 13)

g9249 12" x 37" Belt drive gap Bed lathe
-11-
Wear safety glasses dur-
ing the entire setup pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Setup Safety
SEcTION 3: SETuP
the following items are needed to complete the
setup process, but are not included with your
machine:
Description Qty
• Machinist's precision level ........................ 1
• Assistants .....................................At least 2
• safety glasses ................ 1 for each person
• lifting straps
(rated for at least 1500 lbs.) ........ As needed
• power lifting equipment
(rated for at least 1500 lbs.) ........ As needed
• Floor Mounting hardware ........... As needed
• lubrication .................................. As needed
Items Needed for
Setup
your machine was carefully packaged for safe
transportation. remove the packaging materials
from around your machine and inspect it. if you
discover the machine is damaged, please imme-
diately call Customer Service at (570) 546-9663
for advice.
save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
unpacking
Like all machinery there is potential danger
when operating this machine. Accidents are
frequently caused by lack of familiarity or
failure to pay attention. use this machine
with respect and caution to lessen the pos-
sibility of operator injury. If normal safety
precautions are overlooked or ignored, seri-
ous personal injury may occur.
The Model G9249 is a
heavy machine. Serious
personal injury may occur
if safe moving methods
are not used. To be safe,
get assistance and use
power equipment to move
the shipping crate and
remove the lathe from the
crate.