Grizzly G9249 - Manual (Page 22)

-20-
g9249 12" x 37" Belt drive gap Bed lathe
SEcTION 4: OPERATIONS
Damage to your eyes could result from using
this machine without proper protective gear.
Always wear safety glasses or a face shield
when operating this machine.
NOTICE
If you have never used this type of machine
or equipment before, We strongly recom-
mend that you read books, trade magazines,
or get formal training before beginning any
projects. Regardless of the content in this
section, Grizzly Industrial will not be held
liable for accidents caused by lack of train-
ing.
Operation Safety
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
Basic controls
Headstock controls
use figure 18 and the descriptions below to
become familiar with the headstock controls and
their functions.
A. Power Lamp: lights when power is available
to the motor.
B. Emergency Stop Button: stops the flow of
power to the motor. this button must reset
before the machine can start again.
c. Jog Button: rotate the spindle clockwise
when pressed.
figure 18. headstock controls.
F
d
A B
C
e