GE 29115 Series - Manual (Page 21)

1
CAUTION: To reduce risk of personal injury,
fire, or damage use only the 5-2760 power
adaptor listed in the user’s guide. This power
adaptor is intended to be correctly orientated
in a vertical or floor mount position.
Wall Mounting
1. Turn the base over.
. Attach the wall mounting pedestal by first inserting the
tabs on the open edge of the pedestal into the slots on the
lower portion of the bottom of the base. Then push down
and snap the pedestal into place.
. Slip the mounting holes (on the back of the base) over the
wall plate posts, and slide the unit down into place. (Wall
plate not included.)
NOTE: If desired, gather the extra telephone line
and power adaptor cord and store inside the
wall mounting bracket.