GE 29115 Series - Manual (Page 35)

5
NOTE: If both AUDIO PREDIAL and KEY TONE are
set to on, AUDIO PREDIAL will take the priority
in dialing mode.
Vibrate Ringer
This feature lets you to turn the vibrate ringer on or off.
From the Handset Setup Menu:
1. Press the caller-ID volume ( 6 or 5) button to scroll to the
VIBRATE RINGER sub-menu.
. Press program/mute button to enter the menu. VIBRATE
RINGER 1ON 2OFF shows in the display.
. Use the touch tone pad on the handset to select 1 or , or
use the caller-ID volume ( 6 or 5) button to scroll to your
selection, 2OFF is the default setting.
. Press the program/mute button to confirm your selection.
NOTE: If the Vibrate Ringer is set to ON, the
handset will implement vibrate ringer while
receiving an incoming call.
Message Alert (for answering system)
This feature sets your answering system to give an alert tone
every 10 seconds when there are new messages.
From the Handset Setup Menu:
1. Press the caller ID-volume ( 5 or 6) button to scroll to the
MESSAGE ALERT sub-menu.