GE 29115 Series - Manual (Page 66)

66
NOTE: If the redial number has more than 20
digits, it cannot be stored in memory.
Inserting a Pause in the Dialing Sequence (of a
Stored Number)
Press the #pause/ringer button on the handset’s touch-tone
pad to insert a delay in dialing sequence when a pause is
needed to wait for a dial tone (for example, after you dial 9
for an outside line, or to wait for a computer access tone.)
Each pause counts as one digit in the dialing sequence.
Reviewing Records Stored in Memory
1. Make sure the phone is OFF (not in TALK mode).
. Press the memory button to display SELECT MEMORY
01-50.
. Press the caller ID-volume ( 6 or 5) buttons to scroll the
records, or use the handset’s touch-tone pad to enter the
memory location number.
Changing Records Stored in Memory
Follow the procedure for Storing Names and Numbers in
Memory, except replace a stored telephone number with a
new one.
Deleting Records Stored in Memory
1. Make sure the phone is OFF (not in TALK mode).
. Press the memory button to display SELECT MEMORY
01-50.