GE 29115 Series - Manual (Page 49)

9
Page
The page feature helps you locate a misplaced handset. To
send and receive pages, all handsets must be registered. If
your handset is not registered, follow the instructions in the
Registration section of this manual.
Handset to Handset Paging
(applicable only with
additional handsets)
1. Make sure the phone is OFF (not in TALK mode).
. Press and release the int button on a handset. PAGING
EXTENSION? shows in the display.
. Use the touch-tone pad to enter the handset number you
want to page.
. To cancel the page, press the *tone/exit, int, or TALK/CALL
BACK button on the originating handset, or press the
*tone/exit button on the receiving handset.
Paging All Handsets from a Handset
(applicable only with additional handsets)
1. Make sure the originating phone is OFF (not in TALK mode).
. Press and release the int button on a handset. PAGING
EXTENSION? shows in the display.
. Use the touch-tone pad to enter the handset number you
want to page. (1= to page Handset 1, =to page handset
, etc., and 5=to page all handsets)